The latest state of the art Slurry/Sewage Air Valve design: A Single Body, Double Orifice “Gamma HP Slurry/Sewage Air Valve”.

A new generation of Air Valve Design. Field tested under actual operating conditions. Incorporating all features that have made the FOX Air Valve and Delta HP Air Valve the world’s finest…Now in a Single Body-plus with two independent orifices - to give even greater performance and reliability.

You no longer need to dig deeper trenches or build deeper vaults because the Gamma HP model is at least 30% shorter than other equivalent Slurry/Sewage Air Valve models!

Air Valve that won’t spill or spurt before shutting off. no more messy waste flooded valve vaults to pump out…or pump station floors to mop up…it shuts off drop tight.

Take a serious look at - Gamma HP Slurry/Sewage Air Valve.

Manufactured to our industry’s highest standards providing the highest efficiency and reliability of any sewage air valve available in the market today.

Gamma HP Air Valve are specially designed for use with Slurry/Sewage and Waste media. The float Stem and Body keep the valve Venting Mechanism as free from contact with the sewage as possible. The float hangs freely in the valve body and responds instantaneously to the fall and rise of the sewage media due
to the float.

When Sewage enters the valve, it rises, forcing air out ahead of it. Then as Sewage reaches the float, it raises the float and float stem instantly, due to the very sensitive impact zone. This fast action closes the Venting Mechanism, trapping the remaining air in the valve body. This entrapped air is initially at atmospheric pressure but it’s compressed after the Venting Mechanism closes, and sewage continues rising in the valve, until air and sewage are the same pressure. The sewage then stops rising, leaving the Venting Mechanism free from contamination. Additional gases given off by the sewage rise into the valve body, displacing and lowering the sewage level until the float drops, opening the Venting Mechanism allowing gases to escape. Sewage again rises to occupy the space vacated by the escaped gas, lifts the float and closes the Venting Mechanism. This cycle is repeated frequently as air and gas collect in the valve without spillage or spurting, due to the sensitivity of the float.

1. With two independent orifices.

2.The Viton seat 2 must be fastened to the valve cover, without distortion, for drop-tight shut-off.

3.Without Spilling.
People easily tolerate and are reasonable about water spillage from valves but sewage…that “nasty stuff” is cause for some Engineers and Users alike to avoid use of Sewage Air Valves, regardless of need to a system.
During the past 30 years, the single most highly objectional complaint about the Sewage Air Valve is, “it spills” or “it spurts sewage”!.  The Gamma HP Air Valve float eliminates this complaint because of the unique Impact Zone extremely sensitive to sewage media entering the Sewage Air Valve. The impact zone causes instantaneous and upward movement of the float to shut-off the discharge orifice as soon as media contacts the float. Now, no spilling or spurting occurs even with low pressure (below 20 psi).
4.Suitable for extreme conditions: Slurry pipelines, waterlines, sewage. etc
5.Coating suitable for highly aggressive environments(Epoxy).
6.Full bore design to prevent clogging.
7.Reduces pressure drop.
8.Trim(Float, Stem, Hinge) is non-corrosive stainless steel A276 SS316L
9. Can be microscale venting.
10. Convenient  maintenance.
11. Anti-water hammer.

1.Design & Manufacture standard as to: ASME B31.3 ASME B16.34
2.Height dimension (H)  standard as to: MFR-STD
3.Flange dimension conforms as to: ASME B16.5 / BS EN 1092
Threaded Standard as to:  NPT : ASME B1.20.1  BSP : ISO 7-2: 2000
4.Testing And Inspection as to: API 598
5.Pressure-temperature conforms as to: ASME B16.34
6.Anti Corrosion as per NACE MR-0175(2002) requirement